有一個帶發光二極管電源指示燈的燙發器,在打高壓時,當高壓端接觸到此二極管的管殼時,報警器響,拆開后經實際測量此二極管的工作電壓為5V,工廠據此認為是超低安全電壓,因此可以接受此高壓失敗?請問有道理嗎?
如何判斷此種情況?
謝謝!
高壓失敗的判斷
全部回復(4)
正序查看
倒序查看
the sufficient qualifications to judge if the part comply with SELV requirements are as below;
First: power supply voltage not more than 42volts
Second; internal working voltage not more than 42volts
Third; where the supply is from mains, safety transformer should be provided between mains supply and appliance.
First: power supply voltage not more than 42volts
Second; internal working voltage not more than 42volts
Third; where the supply is from mains, safety transformer should be provided between mains supply and appliance.
0
回復
@alvis.tan
thesufficientqualificationstojudgeifthepartcomplywithSELVrequirementsareasbelow; First:powersupplyvoltagenotmorethan42volts Second;internalworkingvoltagenotmorethan42volts Third;wherethesupplyisfrommains,safetytransformershouldbeprovidedbetweenmainssupplyandappliance.
LZ請仔細看上面的第三條,說的夠明白了
0
回復
