我在菜單DESIGN>>NETLIST FOR PROJECT>>PROTEL和DESIGN>>NETLIST FOR DOCUMENT>>PROTEL兩種情況下生成 .net文件，但是導入pcb以后什么反應都沒有。
有沒有哪位大哥大姐可以告訴我怎么創建網表并將網表導入pcb？updata pcb就算了，因?yàn)槲蚁胫喇?dāng)不在同一project下怎么弄。先謝謝大家了
Protel DXP如何導入網表？
全部回復(1)
正序查看
倒序查看
File » Import » Netlist...
Protel formatted netlists are not supported. The imported netlist must be in the standard IPC-D-356 format.
If the IPC netlist has been imported correctly, you will see two layers added to the layers list in the CAMtastic panel: DesignName.ipc_t and DesignName.ipc_b, reflecting netlist information for the top and bottom signal layers. (A third layer, DesignName.ipc_in, will appear if you have internal signal layers in your PCB design. Unless you have blind and/or buried vias involving these layers, this third layer will be empty and can be left or deleted from the layers list).
If using the Design Explorer-based PCB Editor, the IPC netlist is created by generating a testpoint report and selecting IPC-D-356A as the output format. The individual options available for this format should be left disabled.
Protel formatted netlists are not supported. The imported netlist must be in the standard IPC-D-356 format.
If the IPC netlist has been imported correctly, you will see two layers added to the layers list in the CAMtastic panel: DesignName.ipc_t and DesignName.ipc_b, reflecting netlist information for the top and bottom signal layers. (A third layer, DesignName.ipc_in, will appear if you have internal signal layers in your PCB design. Unless you have blind and/or buried vias involving these layers, this third layer will be empty and can be left or deleted from the layers list).
If using the Design Explorer-based PCB Editor, the IPC netlist is created by generating a testpoint report and selecting IPC-D-356A as the output format. The individual options available for this format should be left disabled.
0
回復
